
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to fine-tune the retract end position during commissioning without adding external stops.
This variant includes a magnet for position sensing with CMSE reed or DMSE electronic switches and uses a PT tapered port thread. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting options cover Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear screw acts purely as a travel stop to set deceleration, not as a lock to hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 165-240mm travel window during product size changes without swapping cylinders or repositioning hard stops.
Use the 75mm rear adjuster to set exact retract distances for multi-format feeding systems on the fly.
Trim the effective stroke precisely during machine setup to prevent crashes and optimize tooling engagement.
The 75mm adjustment range is exceptionally wide, making this cylinder ideal for prototyping or product changeovers where the exact retract distance varies. Unlike a fixed-stroke SAI cylinder, this model absorbs setup variance directly at the rear screw.
Because the total stroke is 240mm, the 12mm carbon steel rod and M10x1.25 thread should be paired with an external guide if the load is heavy or subject to lateral forces. For applications requiring the cylinder to hold its position without continuous air pressure, pair this cylinder with an external pilot-operated check valve or select the SAIL or BSAI locking variants. Ensure your ISO 15552 replacement matches the 32mm bore, 240mm stroke, PT port, and -S magnet.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 75mm. This creates a usable travel window of 165-240mm, allowing you to set the exact retract end position without changing the cylinder.
At 0.7 MPa, the push force increases to 563N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.