
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X25-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X25-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a nominal 25 mm stroke, yielding a usable travel window of 15 to 25 mm so you can dial in the exact retract position without swapping hardware.
This adjustable model uses a PT tapered port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, purposely omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 15 to 25 mm retract distance during machine commissioning to achieve perfect part alignment without external shims.
Quickly adjust the end-stop on packaging lines when switching between slightly different product sizes that share the same 32 mm bore actuator.
If your setup needs less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore increases thrust to 628 N. The rear adjuster allows you to fine-tune the retract position at commissioning or during product changeovers without adding external stops.
For replacement, match the 32 mm bore, 25 mm nominal stroke, 10 mm adjustment range, PT port thread, and the chosen mounting bracket. Because this is a double-acting cylinder, the rear screw acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series. The standard carbon steel rod handles normal loads, while the 30-800 mm/s speed range suits rapid cycling.
Quick checklist
If pressure is increased to 0.9 MPa, the push force reaches 724 N.
The rear adjuster screw lets you shorten the nominal 25 mm stroke by up to 10 mm, creating a usable travel window of 15 to 25 mm. It acts as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.