
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X25-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X25-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore and a 25mm nominal stroke, but the integrated adjusting screw allows you to dial back the travel by up to 20mm. This creates a highly specific 5-25mm usable stroke window, giving you on-the-fly end-position tuning without swapping out the physical cylinder.
Unlike a fixed-stroke SAI cylinder, this model lets you fine-tune the retract end-position directly during machine commissioning or product changeover. The rear adjuster acts purely as a mechanical stop to set the travel limit; it does not lock or hold the load without live air pressure. For load-holding without continuous air, you would need an external rod lock or a related SAIL pneumatic-lock cylinder. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches, though this specific SKU is built without a magnet.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact clamping distance on small parts during machine setup. The 5-25mm travel window allows you to adjust the retract stop for varying material thicknesses without adding external spacers.
Quickly reconfigure end-stops on a packaging line when switching between product sizes. The rear adjuster lets you trim the 25mm stroke back precisely to meet new dimensional requirements.
Eject small components from a fixture with a precisely controlled stroke.
The adjustable 5-25mm window is ideal for applications where the exact end-of-stroke position changes between product sizes, replacing the need for external stopper blocks.
This cylinder uses a PT tapered port thread and accepts standard SAIJ mounting hardware, including Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets. It omits the FB, CA, CB, and CR mounting styles. Because the usable stroke is very short (under 30mm), side-load stress on the 12mm carbon steel rod is minimal, but you should still ensure rigid mounting to prevent binding. The cylinder operates at speeds between 30 and 800 mm/s and features variable air cushions at both ends to soften the impact at the travel limits.
Quick checklist
The cylinder has a 25mm nominal stroke, but the rear adjuster allows you to shorten the travel by up to 20mm. This results in a usable stroke window of 5 to 25mm, letting you fine-tune the exact end-position during commissioning.
If you increase the pressure to 0.7 MPa, the push force increases to 563N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.