verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X25-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke25 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$60.45 $67.95Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S

The AirTAC SAIJ32X25-20-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, equipped with a magnet for position sensing. This compact 32mm bore unit uses a PT tapered port and a 12mm carbon steel rod, making it ideal for applications requiring exact end-position tuning.

Instead of adding external stops, the external adjusting screw lets you shorten the effective stroke by up to 20 mm during commissioning. The rear adjuster acts as a travel stop to set the end position, not a lock, so it will not hold the load without live air. For load-holding requirements, consider the SAIL or BSAI series. This profile cylinder is dimensionally interchangeable per ISO 15552.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke25 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S Is Used

tune

Product Changeover

Dial in the exact 5 to 25 mm travel window on packaging lines when switching to different container sizes without physically swapping cylinders.

precision_manufacturing

Machine Setup

Fine-tune the retract end-position during initial commissioning to perfect the seating of small components using the rear adjustment screw.

settings_input_component

Variable End Stops

Use the 20 mm adjustment range to create variable end stops for delicate pick-and-place operations requiring strict spatial limits.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S the Right Cylinder?

Choose this 32mm bore adjustable-stroke cylinder when you need fine end-position tuning at commissioning or during product changeover without swapping the cylinder. The 12mm rod and M10x1.25 thread handle moderate side loads, but always guide unsupported loads. This SAIJ32X25-20-S configuration includes a magnet for AirTAC CMSE reed and DMSE electronic sensors, uses PT tapered ports, and supports mounting options including Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S FAQ

The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm. This creates a usable travel window of 5 to 25 mm, allowing precise end-position tuning without adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X25-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.