
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 240-250 mm, allowing you to trim the effective stroke by up to 10 mm during commissioning without swapping the cylinder.
This adjustable-stop design eliminates the need to bolt on external shims when fine-tuning end positions. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. If position holding without live air pressure is required, this cylinder is not a lock; you should explore the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 240-250 mm retraction point during machine setup to accommodate minor variations in part dimensions without adding external shims.
Quickly adjust the stroke by up to 10 mm on the production line when switching between similar product profiles, reducing downtime.
Choose this 32 mm bore when an application demands precise end-position tuning within a 240-250 mm travel window. The 10 mm adjustment range is ideal for minor product changeovers where a fixed-stroke SAI cylinder would be too rigid.
Because the 250 mm stroke is relatively long for the 12 mm rod, an external guide is recommended to prevent excessive side-loading on the rod seals. This model uses PT tapered threading and omits the magnet option. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the nominal 250 mm stroke by up to 10 mm, creating a 240-250 mm usable travel window. Note that this adjuster is a stop, not a lock; it cannot hold the load without continuous live air pressure.
The maximum thrust is 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.