
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 250 mm nominal stroke that can be fine-tuned down by up to 100 mm, yielding a usable travel window of 150 to 250 mm.
This adjustable design allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel features sensor grooves on both sides for CMSE or DMSE switches, though this configuration omits the magnet. The rear adjuster acts purely as a travel stop to set the deceleration point alongside the standard air cushions, meaning it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 150-250 mm stroke window during product size transitions without physically replacing the actuator.
Set precise retract positions for testing fixtures using the rear adjuster screw instead of machining custom external stops.
Fine-tune the final end-of-travel position during initial machine setup to perfectly align tooling within a 100 mm range.
The 100 mm adjustment window is ideal for dialing in exact positioning on the fly. Because the stroke is 250 mm, the 12 mm rod requires an external guide to prevent excessive side-loading on the seals.
For an exact ISO 15552 replacement, match the 32 mm bore, 250 mm stroke, 100 mm adjustment range, PT tapered port thread, and carbon steel rod material. Note that this unit uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. If pneumatic load-holding is required without live air pressure, an external rod lock or a SAIL/BSAI variant must be used instead.
Quick checklist
The rear adjuster screw allows you to shorten the effective travel from its 250 mm nominal stroke down to 150 mm. This creates a 150-250 mm usable window, but the adjuster functions only as a mechanical stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.