
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This allows you to dial in the exact retract end-position during commissioning without swapping hardware. An integrated magnet enables position sensing with AirTAC CMSE reed or DMSE electronic switches.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It uses a 12mm carbon steel rod with an M10x1.25 thread, paired with a PT G1/8 tapered port. While the 27mm air cushions at both ends decelerate the load, the rear stopper is a travel limiter, not a lock; it cannot hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract distance from 150mm to 250mm during product size changes without physically replacing the cylinder or adding external stopper blocks.
Fine-tune the exact end-of-stroke position during machine commissioning to perfect the timing of a 32mm bore actuation sequence.
Serve as a variable-length ejection arm where the throw distance must be dialed in precisely for different part sizes on a conveyor.
An adjustable stroke is ideal for product changeovers on a line, replacing the need for fixed-stroke SAI cylinders when end-stops frequently change. Ensure you specify the PT port thread, the -S magnet for sensors, and your required mounting from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Because the nominal stroke is 250mm, the 12mm rod needs an external guide to prevent excessive side-loading on the seals.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from its 250mm nominal length down to as little as 150mm. This provides a 150-250mm usable travel window for fine-tuning at commissioning, but it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.