
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic sensors housed within the dual-side sensor grooves.
With a nominal 250 mm stroke and a 10 mm adjustment range, this SKU provides a usable travel window of 240-250 mm. This allows you to fine-tune the retract end position at commissioning without external stops. The extruded aluminum barrel utilizes variable air cushions at both ends (27 mm cushion stroke) to decelerate the load smoothly across its 30-800 mm/s speed range.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 240-250 mm window during machine setup, compensating for mechanical tolerances without swapping cylinders.
Quickly adjust the stroke by up to 10 mm on packaging lines when handling slightly different product sizes, reducing downtime between runs.
The 10 mm rear adjuster acts purely as a travel stop for product changeovers; it does not hold the load without live air. For load-holding requirements without pneumatic pressure, consider an external rod lock or the related SAIL pneumatic-lock cylinder.
Because the 250 mm stroke is relatively long for a 32 mm bore, the 12 mm rod requires external guiding to prevent excessive side-loading. This cylinder uses a PT tapered port thread and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It is dimensionally interchangeable per ISO 15552, omitting FB, CA, CB, and CR mounts.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from its nominal 250 mm down to 240 mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.