
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the retract end-position at commissioning without swapping out the cylinder or adding external stops.
Fitted with a carbon steel rod and PT tapered port threads, this 32mm bore unit includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel provides sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets. The rear adjuster acts purely as a travel stop for deceleration, not a lock, so live air is required to hold the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 220-250mm retract position during initial commissioning without machining new hard stops.
Quickly adjust the stroke end-point by up to 30mm when running a different product size on the line.
Use the rear stopper to set a precise retract limit, relying on the standard air cushion for smooth deceleration.
If your setup needs less force, stepping down is not an option in this size range, but stepping up to a 40mm bore yields 628N. The adjustable stroke is ideal for fine-tuning machine setup, whereas a fixed-stroke SAI cylinder locks you into one exact dimension. For holding loads without continuous air pressure, consider an external rod lock or the SAIL series.
Because this model has a 250mm stroke, the 12mm diameter rod and M10x1.25 rod thread should be guided externally to prevent excessive side-loading and premature seal wear. To match this ISO 15552 interchangeable cylinder exactly, specify the 32mm bore, 250mm stroke, 30mm adjustment, PT port thread, and the -S magnet option for sensor compatibility.
Quick checklist
The rear adjuster screw allows you to shorten the 250mm nominal stroke by up to 30mm, providing a usable travel window of 220-250mm. This stopper only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.