
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in adjuster allows you to trim the effective travel back by up to 40 mm, creating a 210-250 mm usable stroke window for precise end-position tuning without adding external stops.
This model uses an extruded aluminum barrel with sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It supports a speed range of 30-800 mm/s and includes variable air cushions at both ends. The rear adjuster acts only as a travel stop to set the end position; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 210-250mm retract position during commissioning without machining external stoppers.
Quickly adjust the travel window on packaging lines when switching between different product sizes.
Fine-tune the final end-position of small pneumatic actuators in light assembly machinery.
The adjustable stroke is ideal for machine setup and product changeover, letting you fine-tune the 210-250 mm travel window at commissioning rather than swapping a fixed-stroke SAI cylinder. If you need higher force, stepping up to the 40mm bore yields 628N at 0.5 MPa.
Because the 250mm stroke exceeds 200mm, the 12mm rod may experience side-load deflection under heavy off-center loads; an external guide is recommended for stability. For load-holding without live air, this cylinder is not a lock—consider the SAIL or BSAI series instead. Replacement requires matching the 32mm bore, 250mm stroke, 40mm adjustment, PT G1/8 port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf of push force.
The rear adjuster screw lets you shorten the nominal 250mm stroke by up to 40mm, giving a usable travel window of 210-250mm. This allows precise end-position tuning at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.