
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 200-250 mm, allowing you to dial back the nominal 250 mm stroke by up to 50 mm during commissioning without swapping hardware.
This extruded aluminum profile cylinder includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. It features a carbon steel piston rod with an M10x1.25 thread and PT tapered port threading. The SAIJ mounting set supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments, deliberately omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the end-of-travel stop within the 200-250 mm window during initial setup to dial in exact positioning without machining external stoppers.
Quickly adjust the stroke by up to 50 mm when running a new product size on the line, minimizing downtime between production batches.
Choose this 32 mm bore model when an application requires precise end-position tuning within a 200-250 mm window, rather than the fixed travel of a standard SAI cylinder. The rear adjuster screw acts strictly as a travel stop to set deceleration and end limits, not as a locking device. It will not hold a load without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series, or an external pilot-operated check valve.
When seeking an ISO 15552 interchangeable replacement, verify the 32 mm bore, 250 mm nominal stroke, 50 mm adjustment range, PT port thread, and the absence of a magnet. Because the 250 mm stroke is relatively long for a 32 mm rod, an external guide is recommended to prevent excessive side-loading on the piston.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 50 mm, providing a usable travel window of 200-250 mm. It acts as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
It can reach a maximum thrust of 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.