
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the nominal 250 mm travel by up to 75 mm, creating a flexible 175-250 mm usable end-position window. Equipped with a standard magnet, it supports AirTAC CMSE reed and DMSE electronic sensors housed in the dual-side barrel grooves.
This model uses a 12 mm carbon steel piston rod with an M10x1.25 thread and G1/8 PT ports. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position during commissioning or product changeovers without adding external stops. It includes adjustable air cushions at both ends (27 mm cushion stroke) to decelerate the load, but neither the cushion nor the stopper will hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract end-position within the 175-250 mm window when switching product sizes on a packaging line, eliminating the need to physically swap cylinders.
Dial in the exact stroke length during equipment commissioning to perfect a pressing or clamping distance without machining custom external spacers.
Adjust the travel of a small 32 mm bore diverter arm to accommodate varying package widths on the fly while maintaining safe 30-800 mm/s operating speeds.
Choose this 32 mm bore adjustable-stroke cylinder when your equipment requires variable end-stops or frequent product-size changeovers, stepping up from a 32 mm fixed-stroke SAI when exact positioning is unknown at the design stage. For direct replacements, match the 250 mm stroke, 75 mm adjustment, PT port thread, and the -S magnet requirement.
Because the 250 mm stroke is relatively long for a 32 mm bore, ensure adequate side-load support by guiding the load externally rather than relying solely on the 12 mm rod. For applications requiring true load-holding without continuous air pressure, the rear stopper here is insufficient; instead, explore the SAIL (air-released lock) or BSAI (clamp-lock) cylinder families. The SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some other ISO 15552 variants.
Quick checklist
At the maximum rated pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective stroke from its nominal 250 mm down to 175 mm, providing a 75 mm tuning window. It functions as a mechanical travel stop to set the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.