
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 160 to 260 mm usable travel window, allowing you to dial back the 260 mm nominal stroke by up to 100 mm.
Equipped with a magnet for position detection, it supports AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides. The rear adjuster acts solely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160 to 260 mm end-position during product size changes without swapping the physical cylinder.
Set precise retract limits on the fly for multi-variant assembly lines using the rear 100 mm adjustment screw.
Fine-tune the final retract position during machine setup to avoid adding bulky external mechanical stops.
If you need greater thrust, stepping up to the 40 mm bore yields 628 N. The 100 mm adjustment range is perfect for product-size changeovers on a line, eliminating the need to swap cylinders or bolt on external stops.
For an ISO 15552 replacement, match the 32 mm bore, 260 mm stroke, 100 mm adjustment, PT tapered port, and the -S magnet. Because the stroke is 260 mm, ensure external guides are used to prevent side-load damage to the 12 mm rod. For load-holding without live pressure, consider the SAIL or BSAI series, as this adjuster is not a lock.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers 82 kgf.
The rear adjuster screw lets you shorten the 260 mm nominal stroke by up to 100 mm, creating a 160 to 260 mm usable travel window. It functions as a mechanical stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.