
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 563 Newtons of push force at 0.7 MPa and features a 12 mm carbon steel rod with an M10x1.25 thread. By turning the rear screw, you achieve a usable travel window of 250-260 mm, allowing precise end-position tuning without swapping the cylinder.
This extruded aluminum barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches. The rear adjuster acts strictly as a travel stop for deceleration, not a lock, so live air is required to hold the load. It supports a speed range of 30-800 mm/s and uses a PT G1/8 tapered port.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 250-260 mm retract position during machine commissioning to perfect part ejection without machining new hard stops.
Quickly adjust the stroke by up to 10 mm on a packaging line when handling slightly different carton sizes, reducing setup downtime.
Use the 402 Newton push force at 0.5 MPa to move small jigs into place, relying on the rear stop to set the final coordinate accurately.
Choose this 32 mm bore when an application requires fine-tuning the retract end within a 250-260 mm window during commissioning or product changeover, avoiding the need for external stops. If your setup needs more thrust, stepping up to the 40 mm bore yields 879 Newtons of push force at 0.7 MPa. For a fixed end position without adjustment, the standard SAI cylinder is sufficient.
Because the 260 mm stroke is substantial for a 32 mm bore, an external guide is recommended to prevent excessive side loading on the M10x1.25 rod. This SAIJ32X260-10-S is dimensionally interchangeable per ISO 15552 and includes a magnet for position sensing. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. For load-holding without air pressure, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw lets you shorten the effective travel by up to 10 mm, providing a usable stroke window of 250-260 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.