verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke260 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$79.52 $87.02Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20

The AirTAC SAIJ32X200-20 is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications requiring exact end-position tuning. Equipped with a rear adjusting screw, this model allows you to trim the effective travel back by up to 20 mm, creating a 240-260 mm usable stroke window without needing external stops.

This cylinder features a carbon steel piston rod with an M10x1.25 thread and uses a PT G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily add CMSE or DMSE switches for position detection. It utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X260-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke260 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×260Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20 Is Used

tune

Precision End-Stop Tuning

Dial in the exact 240-260 mm retraction point during machine commissioning to perfect part seating without swapping out the entire actuator.

settings_input_component

Product Changeover

Quickly adjust the stroke by up to 20 mm on the fly to accommodate slightly different product sizes running on the same conveyor line.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20 the Right Cylinder?

Selecting this 32 mm bore cylinder makes sense when your machine setup requires on-the-fly end-stop adjustments rather than a fixed-stroke SAI variant. Because the nominal stroke is 260 mm, you should ensure adequate external guiding to prevent excessive rod side-loading.

For a direct ISO 15552 replacement match, verify the 32 mm bore, 260 mm stroke, 20 mm adjustment range, PT G1/8 port, and your required mounting style. Remember that the rear adjuster acts only as a travel stop to work alongside the air cushions; it does not hold the load without live air. For true load-holding without pressure, consider an external rod lock or the AirTAC SAIL/BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20 FAQ

At a maximum pressure of 1.0 MPa, it can deliver up to 82 kgf.

The rear adjuster screw allows you to shorten the 260 mm nominal stroke by up to 20 mm, providing an effective travel window of 240-260 mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X260-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.