
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel, creating a 240-260 mm usable window for precise end-position tuning. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet supports position detection.
This adjustable-stroke design allows you to fine-tune the retract position at commissioning or during product changeovers without swapping the cylinder or adding external stops. The rear adjuster acts purely as a mechanical stop to set the travel end, complementing the standard variable air cushions at both ends. It is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 240-260 mm window during commissioning to achieve precise end-position tuning without external shims.
Quickly adjust the stroke by up to 20 mm on packaging lines handling varying product sizes, reducing machine setup time between runs.
Set flexible mechanical stops for diverter arms on conveyors, allowing operators to modify the travel end without replacing the entire cylinder.
The adjustable stroke is ideal for variable end-stops and machine setup, giving you a 240-260 mm window to dial in the exact retract distance without machining new hard stops. For load-holding without live air pressure, note that this rear adjuster is a travel stop, not a lock, so you would need an external rod lock or a related SAIL pneumatic lock cylinder.
Because the 260 mm stroke is substantial for a 32 mm bore, the 12 mm rod and M10x1.25 rod thread provide a baseline of rigidity, but an external guide is recommended to prevent side-loading damage on long unsupported strokes. To match this ISO 15552 replacement exactly, confirm the 260 mm nominal stroke, 20 mm adjustment range, PT port threads, and the -S magnet for CMSE reed or DMSE electronic sensors.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 563 N.
The rear adjuster acts as a mechanical stop that lets you shorten the nominal 260 mm stroke by up to 20 mm, providing a usable travel window of 240-260 mm. It sets the travel end but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.