
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows for precise end-position tuning during commissioning without swapping the cylinder or adding external stops.
This model includes a magnet for position sensing with CMSE reed or DMSE electronic sensors. It uses a G1/8 port, a 12mm carbon steel rod with an M10x1.25 thread, and variable air cushions at both ends. Remember that the rear adjuster acts as a travel stop and the cushions only decelerate the load; neither will hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 230-260mm end position during commissioning to perfect a press fit without machining new spacer blocks.
Quickly shorten the retract stroke by up to 30mm to accommodate varying package lengths on a packaging line.
If your application requires higher thrust, stepping up to the 40mm bore yields 628N. The integrated rear stopper is ideal for fine-tuning end positions at setup, whereas a fixed SAI cylinder lacks this commissioning flexibility.
Because this unit has a 260mm stroke, the 12mm rod and M10x1.25 thread may experience side-load deflection under heavy off-center loads; an external guide is recommended. To replace an ISO 15552 cylinder, match the 32mm bore, 260mm stroke, 30mm adjustment, PT port thread, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting, and the -S magnet requirement. For load-holding without live pressure, consider an SAIL or BSAI variant.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82kgf.
The rear adjuster acts as a mechanical stop that trims the effective travel. For this 260mm stroke model, you can fine-tune the end position anywhere within a 230-260mm usable window without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.