
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window down to 220-260 mm from its 260 mm nominal length. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches, though this specific SKU is supplied without a magnet.
This model uses a PT tapered G1/8 port and relies on variable air cushions at both ends to decelerate the moving load. The rear adjuster functions strictly as a mechanical stop for end-position tuning during commissioning or product changeover, meaning it does not hold the load without live air pressure. For applications requiring true position holding without continuous pressure, consider the SAIL or BSAI locking variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 220-260 mm travel window during initial machine setup to perfect end-of-stroke positioning without adding external stopper blocks.
Quickly adjust the retract stop distance on a packaging line when switching to a slightly shorter product format, minimizing downtime.
Set precise retract limits for clamping or pressing operations where the exact final position needs field adjustment rather than a rigid fixed stroke.
Choose this 32 mm bore adjustable cylinder when your machine setup requires precise variable end-stops rather than a fixed 260 mm stroke, allowing you to dial in the exact 220-260 mm travel without swapping hardware. The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some standard ISO 15552 cylinders.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 260 mm stroke, 40 mm adjustment range, PT G1/8 port, and the appropriate mounting accessory. Operating speed ranges from 30-800 mm/s. Because the 260 mm stroke is relatively long for a 32 mm bore, the 12 mm rod and M10x1.25 thread carry limited side-load capacity; an external guide is recommended to prevent rod binding over extended unsupported travel.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 260 mm nominal stroke down to as little as 220 mm, providing a 40 mm tuning window for precise end-positioning without swapping the cylinder.
At 0.7 MPa the push force increases to 563 N, reaching a maximum of 724 N at 0.9 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.