
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling you to dial back the 260 mm nominal travel by up to 40 mm. This creates a highly versatile 220-260 mm usable window, letting you fine-tune end positions at commissioning without swapping out the barrel or adding external stops.
Featuring a carbon steel rod and a PT tapered port thread, this unit includes a magnet for position sensing. The extruded aluminum barrel provides sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a mechanical stop and works in tandem with the variable air cushions at both ends to decelerate the load; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 220-260 mm travel window during product size changeovers on a packaging line without replacing the cylinder.
Use the 40 mm rear adjuster to set precise retract end-positions for different assembly tooling depths at commissioning.
Choose this 32 mm bore when your application requires precise end-position tuning during machine setup or product changeovers. The adjustable rear stopper is ideal for variable end-stops, whereas a fixed-stroke SAI cylinder locks you into a single travel length.
Because the 260 mm stroke is relatively long for a 32 mm rod, the extended unsupported piston travel increases the risk of side-load wear; always use an external guide rail to prevent rod binding. Remember that the adjuster is a travel stop, not a lock—this cylinder will not hold its position or load if air pressure drops. For true load-holding without live pressure, consider the SAIL pneumatic lock or BSAI clamp-lock series. To match this ISO 15552 replacement exactly, verify your 220-260 mm adjustment window, PT ports, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting set, and -S magnet requirement.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers 82 kgf.
The rear adjusting screw acts as a mechanical stopper that lets you shorten the 260 mm nominal stroke by up to 40 mm, providing a usable travel window of 220-260 mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.