
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 260 mm stroke that can be fine-tuned down by up to 50 mm, giving you a precise 210-260 mm usable travel window during commissioning.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. The standard carbon steel rod features an M10x1.25 thread, and pneumatic connections use PT tapered ports. The rear adjuster acts purely as a mechanical stop to set the end position, meaning it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 210-260 mm window during machine setup to accommodate varying material thicknesses without physical rework.
Quickly adjust the stroke stop on the line when switching between different product sizes, minimizing downtime and avoiding cylinder replacement.
Fine-tune the final seating position of a 402 N press operation at 0.5 MPa, ensuring components are joined accurately without overtravel.
Choose this 32 mm bore adjustable-stroke model when your application requires exact end-position tuning without adding external stops or swapping cylinders on product changeovers. Because this cylinder has a 260 mm stroke, the 12 mm rod and M10x1.25 thread should be paired with an external guide to prevent excessive side loading on the piston.
This SKU uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. For a direct ISO 15552 replacement, match the 32 mm bore, 260 mm stroke, 50 mm adjustment, PT ports, and standard carbon steel rod. Since no magnet is specified, it will not work with CMSE or DMSE sensors.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 50 mm from the 260 mm nominal stroke, creating a 210-260 mm usable window. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.