
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel. With a nominal 260mm stroke and a 75mm adjustment range, it provides a usable travel window of 185-260mm.
Equipped with a 12mm carbon steel rod and an M10x1.25 thread, the unit handles moderate side loads while operating at speeds of 30-800mm/s. The extruded aluminum barrel includes sensor grooves on both sides, supporting CMSE reed and DMSE electronic sensors when a magnet is specified. The rear stopper acts solely as a travel end-tuner, meaning this plain cylinder cannot hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 185-260mm travel window during product size transitions without physically swapping out the cylinder or adding external mechanical stops.
Fine-tune the retract end position at commissioning to compensate for mechanical tolerances, ensuring precise placement of light 32mm bore fixtures.
Adjust the stroke on the fly for conveyor diverting tasks that require varying push distances within the 75mm trim range.
The 75mm adjustment window is ideal for accommodating product size changeovers on a line without physically swapping the cylinder or adding external stops.
Because the total stroke is 260mm, an external guide is recommended to prevent excessive rod deflection under load. For load-holding without continuous air pressure, this standard SAIJ is insufficient; consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead. This model uses a PT tapered port and supports the SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82kgf.
The rear adjuster screw acts as a mechanical stop that shortens the retract stroke. For this SAIJ32X260-75 model, you can trim the nominal 260mm stroke back by up to 75mm, giving an effective travel window of 185-260mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.