
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this SKU carries a 75mm adjustment code, you can dial the effective travel back from the 260mm nominal stroke to anywhere within a 185-260mm usable window without swapping the unit out.
This adjustable-stroke design lets you fine-tune the retract end position during commissioning or product changeovers instead of adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reposition the retract end-stop within the 185-260mm window when switching between product formats on a packaging line.
Fine-tune the final resting position during machine commissioning without machining external spacers or replacing the cylinder.
Ideal for assemblies requiring flexible stroke lengths to accommodate varying material widths fed into a workstation.
The 75mm adjustment range is particularly useful for lines running mixed product sizes, allowing you to reposition the end stop quickly. For mounting, this series supports a reduced set of interfaces including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Because the 260mm stroke exceeds 300mm is not the case here, but note that the 12mm rod diameter handles moderate side loads; longer unsupported strokes still require an external guide. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air. For true load-holding without pressure, consider the SAIL or BSAI series. This unit is dimensionally interchangeable per ISO 15552.
Quick checklist
The SAIJ32X260-75-S features a rear adjusting screw that acts as a mechanical stopper, allowing you to trim the 260mm nominal stroke back by up to 75mm. This creates a usable travel window of 185-260mm, which can be fine-tuned at commissioning or during product changeovers without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.