
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external stopper screw, you can trim the nominal 270mm stroke back by up to 100mm, creating a precise 170-270mm usable travel window for exact end-position tuning during commissioning.
This 32mm bore variant features a 12mm carbon steel piston rod and PT G1/8 tapered port. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. The extruded aluminum barrel includes dual sensor grooves, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 170-270mm travel window during product-size changeovers without replacing the cylinder or bolting on external stops.
Fine-tune the retract end-position at commissioning using the 100mm adjustment screw to perfectly seat parts without rework.
Set precise physical boundaries for diverter arms or indexing flights on a packaging line, adjusting on the fly as needed.
Choose this adjustable-stroke model over a fixed SAI when your machine setup requires variable end-stops or frequent product-size changeovers without physically swapping the cylinder or adding external stops.
Because the 270mm stroke is relatively long for the 12mm rod, an external guide is recommended to prevent side-load wear on the seals. Remember that the rear adjuster acts purely as a travel stop, not a lock; it cannot hold the load without live air. For true fail-safe load holding, consider the SAIL or BSAI series instead.
Quick checklist
At the maximum operating pressure of 1.0 MPa, the push force reaches 804N.
The rear adjuster screw lets you shorten the effective travel from the 270mm nominal stroke down to 170mm. It acts as a mechanical stop to set the retract position, but it is not a lock and cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.