
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the retract end-position at commissioning without swapping out the cylinder or adding external stops.
This bore 32 unit features a PT tapered port, a 12mm carbon steel rod with an M10x1.25 thread, and variable air cushions at both ends. Because it carries the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt the 170-270mm travel window on packaging lines when switching between different carton sizes without changing the cylinder.
Fine-tune the retract end-position during initial commissioning to perfectly align tooling, avoiding the need for external mechanical stops.
Dial in the exact 100mm adjustment range for delicate picking and placing operations requiring precise endpoint control.
An adjustable stroke is highly beneficial for machine setups requiring variable end-stops or frequent product-size changeovers, negating the need to inventory multiple fixed-stroke SAI cylinders. For any stroke of 270mm, ensure you use an external guide to prevent excessive side-loading on the 12mm rod.
To match this ISO 15552 interchangeable cylinder for a replacement, verify the 32mm bore, 270mm stroke, 100mm adjustment range, PT port threads, and the -S magnet requirement. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for pilot-operated load-holding, consider the SAIL or BSAI series instead.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective stroke by up to 100mm, providing a usable travel window of 170-270mm from the 270mm nominal stroke. It acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.