
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 260 to 270 mm usable travel window, allowing you to dial back the nominal 270 mm stroke by up to 10 mm during commissioning.
This -S variant includes a magnet for CMSE and DMSE sensors, offering reed or solid-state electronic switching options. The extruded aluminum barrel includes sensor grooves on both sides. It uses a PT tapered port thread and a 12 mm carbon steel rod with an M10x1.25 thread, which handles moderate side loads well.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 260-270 mm travel window on the fly to accommodate new product lengths without changing the cylinder mount.
Leverage the built-in magnet for CMSE or DMSE electronic switches to confirm end-of-stroke positions in automated lines.
Choose this 32 mm bore when an application requires precise end-position tuning without swapping cylinders or adding external stops. The 10 mm adjustment window is ideal for accommodating slight mechanical variations or product size changes on a line.
Because the 270 mm stroke is relatively long, ensure adequate external guiding to prevent excessive rod side-loading. This SAIJ model uses the reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts strictly as a travel stop and deceleration aid; it does not hold loads without live air. For true load-holding without pressure, select an AirTAC SAIL or BSAI cylinder.
Quick checklist
It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the effective travel from 270 mm down to 260 mm. This creates a 10 mm usable window for fine-tuning the retract end position at commissioning without external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.