verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke270 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$79.52 $87.02Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20

The AirTAC SAIJ32X270-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 250 to 270 mm, allowing you to dial in the exact end position during commissioning without adding external stops.

This model features a 12 mm carbon steel rod with an M10x1.25 thread, offering robust side-load resistance for its size. It uses PT tapered G1/8 ports and includes adjustable air cushions at both ends. The extruded aluminum barrel integrates sensor grooves on both sides for CMSE reed or DMSE solid-state switches if needed later.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X270-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke270 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×270Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20 Is Used

settings_input_component

Variable End-Stop Tuning

Fine-tune the retract position by up to 20 mm during machine commissioning to perfectly align tooling without machining new hard stops.

conveyor_belt

Product Size Changeover

Quickly adapt the stroke length on packaging lines when handling slightly different carton sizes, using the rear screw to shift the end position.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20 the Right Cylinder?

If your process needs less force, stepping down is an option, but if you require higher clamping power, consider the 40 mm bore which provides 628 N. The adjustable rear stopper is ideal for machine setups requiring variable end-stops or product changeovers, functioning differently than a fixed-stroke SAI cylinder.

Because the 270 mm stroke is relatively long for a 32 mm bore, an external guide is recommended to prevent excessive rod side-loading. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. This SAIJ model is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20 FAQ

It operates at speeds between 30 and 800 mm/s.

The rear adjuster acts as a mechanical stop that lets you shorten the nominal 270 mm stroke by up to 20 mm, creating a 250-270 mm usable travel window. It is a travel stop, not a lock, and cannot hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X270-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.