
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 270 mm nominal stroke that can be dialed back by up to 30 mm, giving you a 240-270 mm usable travel window for precise end-position tuning during commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops when finalizing machine setup. It features a standard PT G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The mounting set is a reduced subset of standard ISO types, including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 240-270 mm end position when switching product sizes on a packaging line, avoiding the need to physically swap out cylinders.
Fine-tune the retract end position during initial commissioning to compensate for mechanical tolerances without adding bulky external stoppers.
Adjust the travel window on a sorting diverter arm to handle different package dimensions on the fly.
Choose this 32 mm bore SAIJ model when your application requires variable end-stops or fine-tuning at changeover without replacing the entire cylinder. Because the nominal stroke is 270 mm, you should use an external guide to prevent excessive side loads on the 12 mm rod and M10x1.25 thread.
The rear adjuster acts purely as a mechanical travel stop and works with the built-in air cushions to decelerate the piston. It does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL pneumatic lock or BSAI clamp-lock series. To replace an ISO 15552 cylinder, match the 32 mm bore, 270 mm stroke, 30 mm adjustment, PT G1/8 port, and your required mounting option.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the 270 mm nominal stroke by up to 30 mm, creating a 240-270 mm adjustable travel window. It functions as a mechanical stop to set the end position and is not a lock or brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.