
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 240 to 270 mm, allowing you to dial back the nominal 270 mm stroke by up to 30 mm during commissioning.
This unit includes a standard piston magnet for CMSE reed and DMSE electronic sensors, fitting directly into the dual-side barrel grooves. It uses a 12 mm carbon steel rod with an M10x1.25 thread, and PT tapered port threading. The rear adjuster acts strictly as a travel stop, meaning it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 240 to 270 mm end-position during product line changeovers without adding external physical stops.
Dial in the exact retract distance for delicate picking tasks using the 30 mm rear adjustment screw.
The 30 mm adjustment window is ideal for variable end-stops and product-size changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead, as this adjuster is not a lock.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 270 mm stroke, PT port, and the -S magnet requirement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 270 mm stroke is relatively long for this compact bore, ensure an external guide supports the rod to prevent excessive side-loading.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you shorten the effective travel from the 270 mm nominal stroke down to 240 mm. This stopper only sets the end position; it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.