
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to 230 mm from the 270 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This adjustable model uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. The rear adjuster acts purely as a mechanical stop to dial in the end position during commissioning without adding external stops. It does not hold the load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 230-270 mm travel window during machine changeovers to accommodate slightly different product lengths without swapping cylinders.
Fine-tune the retract position to compensate for mechanical wear or sensor drift on high-cycle assembly stations.
Set precise actuation limits for diverting varying package sizes on a packaging line without installing external hard stops.
The 12 mm rod and M10x1.25 thread handle moderate side loads, but because this 270 mm stroke exceeds 250 mm, an external guide is recommended to prevent rod deflection.
Select this adjustable variant over a fixed SAI cylinder when you need a variable end-stop to compensate for mechanical tolerances. To match this ISO 15552 replacement, verify the 270 mm stroke, 40 mm adjustment range, PT tapered port thread, and standard carbon steel rod. Without a -S magnet option specified, this unit does not support position sensing.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 270 mm down to 230 mm. This creates a 40 mm adjustable travel window for fine-tuning the end position during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.