
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in magnet enables position detection with CMSE reed or DMSE electronic sensors.
With a nominal 270mm stroke and a 40mm adjustment range, this model provides a usable travel window of 230 to 270mm. You can fine-tune the retract end-position at commissioning without adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 230-270mm window during machine commissioning without swapping cylinders.
Quickly adjust the stroke by up to 40mm on packaging lines when handling slightly different product sizes.
Fine-tune the clamping reach on machining fixtures where a fixed 270mm stroke would over-travel and damage parts.
Choose this 32mm bore when an application requires precise end-position tuning within a 230-270mm window. If your setup needs less force, stepping down is not an option below 32mm in this series, but if you need significantly more thrust, a 40mm bore provides 628N at 0.5 MPa. The adjustable stroke is ideal for product changeovers, whereas a fixed SAI cylinder suits static end-stops.
For exact ISO 15552 replacement matching, verify the 32mm bore, 270mm stroke, 40mm adjustment, PT tapered port thread, and the -S magnet option. Because the 270mm stroke is relatively long for a 32mm rod, ensure you use an external guide to prevent excessive side-loading. For load-holding without air pressure, consider an external rod lock or the SAIL series instead of relying on the adjuster.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 270mm down to 230mm. It functions as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.