
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a highly flexible usable stroke window of 195 to 270 mm, letting you dial in exact end positions at commissioning without swapping out the physical cylinder.
The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration. It uses a 12 mm carbon steel rod with an M10x1.25 thread, which handles moderate side loads well, though this 270 mm stroke still benefits from an external guide to prevent rod binding. The rear adjuster acts purely as a mechanical stop for end-position tuning and deceleration setup, meaning it will not hold the load dynamically without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reset the effective stroke from 195 to 270 mm during packaging line format changes without removing the cylinder or adding external spacers.
Fine-tune the retract end-position during machine commissioning to compensate for mechanical tolerances and ensure precise part ejection.
Adjust the travel distance of a conveyor routing flap on the fly to handle different package sizes without reprogramming the pneumatic controls.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires variable end-stops or frequent product changeovers that demand different stroke lengths within the 195-270 mm range. If you need higher clamping forces, stepping up to the 40 mm bore increases push thrust to 628 N at 0.5 MPa, while dropping to a smaller bore would sacrifice too much power for most standard handling tasks. Because the 270 mm stroke is substantial, always use an external guide rail to support the load and protect the 12 mm rod from deflection.
To match this exact configuration for an ISO 15552 replacement, specify a 32 mm bore, 270 mm nominal stroke, up to 75 mm adjustment range, PT tapered port threads, and no magnet. The SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some fixed-stroke variants.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear mechanical stopper allows you to shorten the nominal 270 mm stroke by up to 75 mm, creating a usable travel window between 195 and 270 mm. This adjuster acts as a travel stop for position tuning and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.