
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X270-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X270-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore and a 270mm nominal stroke that can be dialed back by up to 75mm, providing a usable travel window of 195-270mm for precise end-position tuning.
This adjustable-stroke variant omits the FB, CA, CB, and CR mounts found on some standard cylinders, utilizing a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) to fit tight machine envelopes. The built-in -S magnet pairs directly with AirTAC CMSE reed and DMSE solid-state sensors housed in the dual-side barrel grooves, while the standard carbon steel rod and PT tapered port threads ensure robust, leak-free pneumatic connections.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X270-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 195-270mm travel window during format changes on packaging lines without physically replacing the actuator.
Fine-tune the retract end-position at commissioning to perfect sensor alignment and mating part engagement without adding external stops.
Adjust the rear stroke stopper to accommodate multiple product sizes on a single conveyor or clamping station.
Choose this 32mm bore adjustable cylinder when your application requires variable end-stops for frequent product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. Because the total stroke is 270mm, you should incorporate an external guide to prevent excessive side-loading on the 12mm carbon steel rod.
The rear adjuster acts solely as a mechanical travel stop and works alongside the adjustable air cushions to decelerate the load; it does not hold the load without live air pressure. For drop-prevention or load-holding requirements, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder. To replace an existing cylinder, verify the 32mm bore, 270mm stroke, 75mm adjustment range, PT G1/8 port, and -S magnet specification.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective travel from the 270mm nominal stroke by up to 75mm. This creates a usable stroke window of 195-270mm, enabling precise end-position tuning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.