
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X275-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X275-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 255 to 275 mm, allowing you to dial back the nominal stroke by up to 20 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback integration.
Equipped with a 12 mm carbon steel rod and an M10x1.25 thread, this unit handles moderate side loads effectively. It uses PT tapered port threads (G1/8) and features variable air cushions at both ends to manage impact deceleration. The rear adjuster functions purely as a travel stop to set the end position; it does not hold the load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X275-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 255-275 mm window during machine commissioning without adding external stopper blocks.
Quickly adapt the stroke end-stop for different product sizes on a packaging line, reducing setup downtime significantly.
Choose this 32 mm bore adjustable cylinder when your setup requires exact end-position tuning without swapping out physical components. Conversely, if you need less force in a tighter footprint, you would step down. Because the stroke is 275 mm, which exceeds 300 mm is not the case here, but always ensure external guides are used for long unsupported rods to prevent binding.
An adjustable stroke is preferred over a fixed SAI cylinder when you need a variable end-stop for product changeovers. For load-holding without live air pressure, this adjuster will not act as a lock; you would need to explore the SAIL or BSAI series instead. This model is dimensionally interchangeable per ISO 15552 mounting interfaces, features PT tapered ports, and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from 275 mm down to 255 mm. This stopper mechanically limits the retract end-position for fine-tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.