
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X275-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X275-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 275mm travel that can be dialed back by up to 30mm, giving operators a 245-275mm usable stroke window for precise end-position tuning.
This model uses a 12mm carbon steel rod with an M10x1.25 thread, and its extruded aluminum barrel includes sensor grooves on both sides. The rear adjuster acts purely as a mechanical stop to fine-tune deceleration, meaning it will not hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X275-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 245-275mm travel window during product size transitions without replacing the cylinder or adding external stopper blocks.
Fine-tune the retract stroke end by up to 30mm at commissioning to perfectly align pick-and-place heads or tooling.
Choose this 32mm bore when an application requires exact end-stop calibration during commissioning or product changeovers, avoiding the need to swap cylinders or add external stops. Conversely, lighter tasks can drop to smaller diameters.
Because the 275mm stroke is relatively long for this 32mm bore, always support the load with an external guide to prevent excessive rod side-loading. For true load-holding without live air, select the SAIL or BSAI series instead. This PT-threaded cylinder mounts via Basic, FA, LB, TC, FTC, TCM1, or TCM2 interfaces.
Quick checklist
The maximum thrust is 82kgf at 1.0MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 275mm nominal stroke by up to 30mm. This creates a 245-275mm usable travel window for fine-tuning without swapping components.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.