
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X275-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X275-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 235 to 275 mm, allowing you to dial back the 275 mm nominal stroke by up to 40 mm.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during commissioning or product changeovers. It features a 12 mm carbon steel rod with an M10x1.25 thread, and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) that omits FB, CA, CB, and CR. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X275-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 235-275 mm end-position during commissioning to perfect product spacing without machining new hard stops.
Quickly adapt the stroke length by up to 40 mm on the line when switching to a different product size, minimizing downtime.
Achieve precise end-of-stroke positioning for delicate assembly tasks, relying on the standard air cushion and mechanical stopper for smooth deceleration.
Because the stroke is 275 mm, you should ensure an external guide supports the load to prevent excessive side-loading on the 12 mm rod.
The rear adjuster acts strictly as a travel stop for end-position tuning, not a load-holding lock. It cannot hold the load without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series. This model is dimensionally interchangeable per ISO 15552 and features a PT tapered port thread.
Quick checklist
The rear adjuster screw lets you shorten the effective travel by up to 40 mm, creating a usable stroke window of 235 to 275 mm. This allows fine-tuning of the end position at commissioning without replacing the cylinder.
The standard speed range for this 32 mm bore is 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.