
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X275-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X275-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 225-275 mm, allowing you to dial back the 275 mm nominal stroke by up to 50 mm during machine commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops when fine-tuning retract end-positions. The rear adjuster functions purely as a travel stop, not a lock, meaning it will not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X275-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 225-275 mm window during machine setup without changing the physical cylinder.
Quickly adapt the stroke length by up to 50 mm when switching product sizes on a packaging line.
Fine-tune clamping locations precisely at commissioning, relying on the rear stopper rather than adding external hardware.
The 275 mm stroke exceeds the 300 mm threshold, so an external guide is recommended to prevent side-load damage to the 12 mm rod. To match this ISO 15552 cylinder, specify the PT port thread, carbon steel rod, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that shortens the effective travel from the 275 mm nominal stroke down to as little as 225 mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.