
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X275-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X275-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 275 mm stroke that can be dialed back by up to 75 mm, yielding a usable travel window of 200 to 275 mm. This wide adjustment band is ideal for product changeovers, letting you fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops.
This bore 32 unit features a carbon steel rod with an M10x1.25 thread and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and the included magnet (-S) supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback. It operates at speeds from 30 to 800 mm/s and utilizes a 27 mm air cushion at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X275-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop for varying package sizes on a packaging line without replacing the cylinder or repositioning hard stops.
Fine-tune the retract position during initial setup to perfectly time tooling engagement, absorbing mechanical tolerances within the 200-275 mm window.
Adjust the travel limit on the fly for testing different material lengths in a clamping fixture before finalizing the machine parameters.
The rear mechanical stopper acts solely as a travel adjuster and deceleration aid; it is not a lock. To hold a load securely without live air pressure, select an AirTAC SAIL (pneumatic lock) or BSAI (clamp-lock) cylinder, or install an external pilot-operated check valve.
As a dimensionally interchangeable ISO 15552 cylinder, it replaces other standard profile cylinders using the exact same mounting interface. Available mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because this model features a 275 mm stroke, the 12 mm rod and M10x1.25 thread should be supported by an external guide to prevent excessive side-loading and premature seal wear during extended travel.
Quick checklist
At the maximum rated pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjusting screw acts as a mechanical stopper that shortens the effective stroke from the nominal 275 mm down to a minimum of 200 mm. This allows you to set the exact travel distance within that 75 mm window during commissioning without altering the cylinder mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.