verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke280 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$79.52 $87.02Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10

The AirTAC SAIJ32X280-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 270-280 mm usable travel window, allowing you to trim the effective stroke by up to 10 mm during commissioning without swapping the cylinder or adding external stops.

This 32 mm bore profile cylinder features adjustable air cushions at both ends to manage end-of-stroke impacts. The rear adjuster acts purely as a travel stop for position fine-tuning and does not lock the load without live air; for load-holding requirements, consider the SAIL or BSAI series. It supports standard SAIJ mounting options including Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X280-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke280 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×280Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10 Is Used

tune

Machine Setup & Changeover

Dial in the exact 270-280 mm end position during product family changeovers without machining new hard stops or altering the pneumatic plumbing.

precision_manufacturing

Variable End-Stop Tuning

Fine-tune the retract position by up to 10 mm at commissioning to perfectly align tooling marks or prevent mechanical interference.

conveyor_belt

Product Size Adjustments

Accommodate slight variations in incoming product lengths on a packaging line by adjusting the rear stopper rather than repositioning the cylinder.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10 the Right Cylinder?

Choose this 32 mm bore cylinder when an application requires precise end-position tuning within a 270-280 mm travel window. Conversely, if lower force is acceptable, verify the minimum operational requirements of your system. The 10 mm adjustment range is perfect for dialing in exact end stops during machine setup or product changeover.

Because this model features a 280 mm stroke, the 12 mm carbon steel rod and M10x1.25 rod thread should be guided externally if the load is heavy or subject to lateral forces, as long unsupported strokes can induce side-loading. This cylinder is dimensionally interchangeable per ISO 15552 and uses a PT tapered port thread. It does not include a magnet; if position sensing is required, select the -S option to use CMSE reed or DMSE electronic sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10 FAQ

The rear adjuster screw allows you to shorten the nominal 280 mm stroke by up to 10 mm, providing a usable travel window of 270-280 mm. This stopper sets the end position but does not hold the load dynamically without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X280-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.