verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke280 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$79.52 $87.02Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100

The AirTAC SAIJ32X280-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a substantial 100mm adjustment range, allowing you to dial the effective travel down from the nominal 280mm to a 180mm minimum.

This model uses a standard carbon steel piston rod and PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a mechanical stop to decelerate travel at the retract end; it is not a lock, so the cylinder will not hold a load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X280-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke280 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×280Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100 Is Used

tune

Machine Changeover

Quickly fine-tune the retract end-position within the 180-280mm window when adapting machinery to run a different product size.

precision_manufacturing

Variable End-Stops

Set precise retract limits during commissioning without needing to fabricate and bolt on external mechanical stops.

conveyor_belt

Sorting Diverter

Adjust the actuator's reach on a packaging line to handle varying package widths on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100 the Right Cylinder?

Choose this 32mm bore adjustable cylinder when your setup requires variable end-stops for product changeovers without swapping out the entire unit. Conversely, if you need a fixed travel length and do not require on-the-fly adjustments, the standard SAI cylinder is a simpler alternative.

Because the 280mm stroke creates a long unsupported rod extension, an external guide is recommended to prevent excessive side-loading and premature seal wear. For load-holding requirements without continuous air pressure, this cylinder is not suitable; consider the SAIL or BSAI series instead. To replace an ISO 15552 cylinder, match the 32mm bore, 280mm stroke, 100mm adjustment, PT port, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100 FAQ

It operates at speeds between 30-800 mm/s.

The rear adjuster screw lets you shorten the effective travel from the 280mm nominal stroke down to 180mm. This allows you to set the exact retract end-position during commissioning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X280-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.