
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. This built-in stopper eliminates the need to swap cylinders or bolt on external stops when tuning end positions.
The 32mm bore uses a G1/8 port and a 12mm carbon steel rod with an M10x1.25 thread. Because this unit includes the -S magnet, it supports direct mounting of AirTAC CMSE reed and DMSE solid-state electronic sensors along the dual-side sensor grooves. The extruded aluminum barrel design incorporates adjustable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 180 to 280mm travel window during setup without physically swapping out the cylinder or adding external mechanical stops.
Quickly adapt the cylinder's extended reach on packaging lines when switching between different package sizes or product formats.
Leverage the -S magnet option to mount DMSE solid-state or CMSE reed switches directly into the barrel grooves for precise position feedback.
Choose this adjustable model over a fixed SAI cylinder when your application requires variable end-stops or frequent product-size changeovers on the line. To match this ISO 15552 footprint for a direct replacement, verify the 32mm bore, 280mm stroke, 100mm adjustment range, PT tapered port threads, and the -S magnet requirement.
With a 280mm stroke, the 12mm rod requires careful alignment to prevent excessive side-loading; always use an external guide for unsupported loads. Remember that the rear adjuster acts only as a travel stop and the air cushions manage deceleration—neither holds the load without live air. For true load-holding without continuous pressure, consider an external rod lock or the AirTAC SAIL or BSAI series.
Quick checklist
The rear external screw allows you to shorten the effective travel by up to 100mm. This creates a 180-280mm adjustable window, letting you fine-tune the retract end position without changing the cylinder.
At 0.7MPa, the push force increases to 563N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.