
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel. With a nominal 280 mm stroke and a 20 mm adjustment range, it provides a usable 260-280 mm travel window. This built-in stopper lets you dial in end positions during commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet integrates seamlessly with AirTAC CMSE reed and DMSE electronic switches for exact position feedback. It uses a 12 mm carbon steel rod with an M10x1.25 thread, and the PT G1/8 porting ensures straightforward pneumatic connections. The rear adjuster acts purely as a travel stop, meaning it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 260-280 mm travel window during product size changes without physically swapping the cylinder or adding external stopper blocks.
The integrated -S magnet works with CMSE and DMSE switches to confirm the adjusted end position in automated assembly lines.
The adjustable stroke is ideal for fine-tuning end positions at setup, whereas a fixed-stroke SAI cylinder requires exact travel dimensions upfront. To replace an ISO 15552 cylinder, match the 32 mm bore, 280 mm stroke, 20 mm adjustment, PT G1/8 port, and -S magnet.
Because the 280 mm stroke is relatively long for a 32 mm bore, the 12 mm rod and M10x1.25 thread have limited side-load capacity. An external guide is recommended to prevent rod binding. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. For load-holding without live air, use a SAIL lock, BSAI clamp-lock, or external rod lock.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 280 mm nominal stroke by up to 20 mm. This creates a 260-280 mm usable travel window for fine-tuning end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.