
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 250 to 280 mm usable travel window, allowing you to trim the effective stroke by up to 30 mm during commissioning without swapping the cylinder.
This extruded aluminum body includes sensor grooves on both sides for flexible switch placement. The rear stopper functions as a travel end-stop for fine-tuning product changeovers, but it is not a locking device. For load-holding without live air pressure, consider an external rod lock or the related SAIL series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250-280 mm travel window during product size changes to set new end positions rapidly without adding external stops.
Fine-tune the retract stroke by up to 30 mm at commissioning to perfect the seating of parts without replacing the actuator.
Vary the stroke length on a sorting gate to handle different package sizes on the fly while maintaining ISO 15552 mounting dimensions.
If your application requires greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The PT tapered port and G1/8 thread size match standard pneumatic manifolds. Because the stroke is 280 mm, ensure external guiding is used to prevent excessive side-loading on the 12 mm rod.
This adjustable model is selected over a fixed-stroke SAI cylinder when machine setups require variable end-stops. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. Since no magnet is specified, position sensing via CMSE or DMSE switches is not enabled out of the box.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a stopper that lets you shorten the 280 mm nominal stroke by up to 30 mm, creating a 250 to 280 mm travel window. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.