
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 250-280 mm, allowing you to dial back the 280 mm nominal stroke by up to 30 mm during commissioning without swapping hardware. Equipped with a carbon steel rod and a -S magnet, it integrates seamlessly with CMSE reed and DMSE solid-state sensors via the dual-side barrel grooves.
The rear adjuster acts purely as a mechanical stop for end-position tuning and deceleration; it is not a lock, so the cylinder will not hold a load without live air pressure. For position-holding needs, explore the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 250-280 mm travel window during product changeovers without physically replacing the cylinder or adding external stopper blocks.
Dial in the exact retract position within the 30 mm adjustment range to accommodate varying material thicknesses or sensor targets.
Achieve precise end-of-stroke positioning for 32 mm bore assembly tasks, using the rear screw to absorb mechanical tolerance during machine commissioning.
Choose this SAIJ32X280-30-S model when your application requires exact end-position tuning within a 250-280 mm travel window, avoiding the need for external stops or a fixed-stroke SAI cylinder. If your process requires less force, stepping down is not an option at this stroke, but stepping up to a 40 mm bore yields 628 N at 0.5 MPa. Because the 280 mm stroke is substantial for a 32 mm bore, the 12 mm rod and M10x1.25 thread handle moderate side loads, but an external guide is recommended for unsupported loads to prevent rod deflection. This configuration uses PT tapered ports and includes a magnet for position sensing.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 30 mm, providing a usable travel window of 250-280 mm from the 280 mm nominal stroke. It functions as a mechanical stop for end-position tuning and does not lock the load without continuous air pressure.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.