
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 240-280 mm usable travel window, allowing you to trim the effective stroke by up to 40 mm during commissioning without swapping the cylinder.
This variant includes a magnetic piston for position sensing and uses a PT tapered port thread. The extruded aluminum barrel features sensor grooves on both sides, enabling precise installation of CMSE reed or DMSE electronic solid-state switches. An integrated air cushion at both ends handles end-of-stroke deceleration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 240-280 mm travel window on the fly to accommodate different package lengths on a packaging line without changing hardware.
Fine-tune the retract end position during initial commissioning to achieve precise alignment of light-duty 32 mm bore actuators.
Replace rigid external stops with the built-in 40 mm adjuster to easily test multiple end-of-stroke positions for assembly fixtures.
If your setup demands greater thrust, stepping up to the 40 mm bore yields 628 N. The adjustable stroke is specifically beneficial for machine setups requiring variable end stops or frequent product-size changeovers, replacing the need for fixed-stroke SAI cylinders or external stops.
Because this model features a 280 mm stroke, the 12 mm carbon steel rod and M10x1.25 thread should be guided externally to prevent excessive side-loading. Note that the rear adjuster functions strictly as a travel stop and does not hold the load without live air; for dead-air load holding, consider an external rod lock or the SAIL series. It maintains ISO 15552 mounting interface compatibility and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
At its maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 280 mm nominal stroke by up to 40 mm, creating a 240-280 mm usable travel window. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.