
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers 402 Newtons of push force at 0.5 MPa and uses a PT tapered port with a 12 mm carbon steel rod. The built-in rear stopper allows you to trim the effective travel down by up to 50 mm, creating a precise 230 to 280 mm usable window for product changeovers.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during commissioning. Because it is an extruded aluminum profile cylinder, it features sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The rear screw acts purely as a travel stop and works alongside the standard 27 mm air cushions to decelerate the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 230-280 mm retract position on the fly when switching between packaging sizes, avoiding physical cylinder swaps.
Fine-tune the final end position during machine commissioning to achieve precise mechanical alignment without external shims.
Adjust the stroke length on a sorting diverter arm to accommodate different package depths on the fly.
If your setup demands higher force, stepping up to the 40 mm bore yields 628 N. Select the SAIJ adjustable version over a fixed SAI cylinder when a machine handles multiple product sizes and needs a dialed-in retract point without mechanical rebuilds. For exact ISO 15552 replacement matching, verify the 32 mm bore, 280 mm stroke, 50 mm adjustment range, PT port thread, and your required mounting bracket from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is 280 mm, ensure adequate external guiding to prevent excessive side-loading on the 12 mm rod.
Remember that the SAIJ rear adjuster is a hard stop, not a locking device. It cannot hold a load in place without continuous live air pressure. If your application requires true load-holding on interruption of air supply, consider an AirTAC SAIL pneumatic lock cylinder, a BSAI clamp-lock model, or an external pilot-operated check valve.
Quick checklist
At a maximum 1.0 MPa, the push force reaches 80 kgf.
The rear adjuster screw lets you shorten the 280 mm nominal stroke by up to 50 mm, providing an effective travel window of 230 to 280 mm. It acts as a mechanical stop to set the position, but it is not a lock and requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.