
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This bore 32 unit includes a magnetic piston for position sensing and uses a PT tapered port thread. The rear adjuster acts purely as a travel stop to decelerate the load, meaning it will not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt the cylinder's effective stroke between 205 and 280mm to accommodate different product sizes on the same production line without mechanical rebuilds.
Fine-tune the retract end-position during machine commissioning to achieve exact alignment, using the rear stopper screw rather than adding external shims.
Control the ejection distance of small parts precisely by trimming the stroke back up to 75mm, allowing operators to set optimal push-out lengths on the fly.
Choose this adjustable model when you need to dial in a specific end-of-stroke position across a 205 to 280mm window without swapping cylinders or adding external stops. If your application requires less force, stepping down is not an option below bore 32, but if you need more thrust, a bore 40 cylinder provides 628N at 0.5 MPa. Because this unit has a 280mm stroke, ensure adequate external guidance to prevent excessive side-loading on the 12mm carbon steel rod.
For an exact ISO 15552 replacement, match the 32mm bore, 280mm stroke, 75mm adjustment, PT port, and the -S magnet. This cylinder accepts the reduced SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. The integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 75mm. This creates a usable travel window of 205 to 280mm, letting you set the exact retract end-position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.