
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated rear stopper allows you to trim the effective travel, creating a 280-290mm usable stroke window for precise end-position tuning during commissioning.
This variant features a carbon steel piston rod and lacks a magnet, meaning it cannot host CMSE or DMSE sensors. The extruded aluminum barrel includes standard sensor grooves on both sides should you later require position feedback. Variable air cushions at both ends manage end-of-stroke deceleration, but note the adjuster acts as a travel stop, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 280-290mm travel distance during machine commissioning to perfect product handling without adding bulky external stops.
Quickly adjust the retract end-position by up to 10mm when switching product sizes on a packaging line, minimizing downtime.
Provide adjustable mechanical stops for pressing or positioning tasks where slight stroke variations are needed between runs.
Choose this 32mm bore when you need precise 280-290mm travel tuning without swapping cylinders during product changeover. The rear adjuster allows fine end-position calibration, unlike a fixed-stroke SAI cylinder.
For true load holding without live air pressure, this plain SAIJ cylinder is insufficient as its adjuster is only a stop. You would need to specify a SAIL (air-released lock) or BSAI (clamp-lock) variant, or use an external pilot-operated check valve. Because the stroke is 290mm, ensure adequate external guidance to prevent excessive side-loading on the 12mm rod and M10x1.25 thread.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82kgf.
The rear adjuster screw acts as a mechanical stop that shortens the effective travel. For this SAIJ32X290-10 model, you can trim the nominal 290mm stroke back by up to 10mm, resulting in a 280-290mm usable travel window.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.