verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke290 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$79.52 $87.02Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100

The AirTAC SAIJ32X290-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window down from a 290 mm nominal stroke to a 190 mm minimum. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration.

Equipped with a 12 mm carbon steel rod and an M10x1.25 thread, this unit utilizes PT tapered G1/8 ports. The rear adjustment screw functions purely as a mechanical stop to dial in the end position during commissioning; it is not a locking device and cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X290-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke290 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100 Is Used

tune

Variable End-Stop Positioning

Dial in the exact retraction point between 190 and 290 mm during machine setup, allowing rapid accommodation of different product lengths without changing the cylinder.

settings_input_component

Changeover Adjustment

Quickly modify the effective stroke on packaging lines handling varying carton sizes, using the rear screw to set precise mechanical limits.

precision_manufacturing

Prototype Commissioning

Fine-tune the travel distance during initial machine commissioning to find the optimal operating window before finalizing hard stops.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100 the Right Cylinder?

Choose this 32 mm bore when your application requires precise end-stop tuning without swapping out cylinders during product changeovers. Conversely, if you need less force in a tighter footprint, the SAIJ series does not offer a smaller standard bore. The 100 mm adjustment range is particularly useful for prototyping or varying part sizes on a single line. Because the nominal stroke is 290 mm, an external guide is recommended to prevent excessive side-load wear on the 12 mm rod. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, omitting FB, CA, CB, and CR. This configuration uses standard carbon steel rod material, PT port threads, and no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100 FAQ

The operational speed range is 30-800 mm/s, supported by variable air cushions at both ends.

The rear adjuster acts as a mechanical stop that allows you to shorten the effective travel from the 290 mm nominal stroke down to 190 mm. This creates a 100 mm tuning window for precise end-positioning, though it does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X290-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.