
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 290 mm nominal stroke, yielding a usable travel window of 190 to 290 mm. This wide adjustment range allows you to dial in the exact retract end-position at commissioning without swapping hardware.
This variant includes a magnet for position sensing and uses a carbon steel rod with an M10x1.25 thread. Because the 290 mm stroke is relatively long for a 32 mm bore, the 12 mm rod should be guided externally to prevent excessive side-loading. The extruded aluminum barrel includes sensor grooves on both sides, compatible with AirTAC CMSE reed and DMSE electronic switches.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt retract distances on a packaging line when switching between different container sizes, using the 100 mm adjustment window to avoid mechanical rebuilds.
Fine-tune the exact end-of-stroke position during machine commissioning to perfectly align a 32 mm bore actuator without adding external stopper blocks.
Set precise retract limits for delicate picking operations, relying on the rear screw to limit the travel window anywhere between 190 and 290 mm.
Choose this adjustable-stroke model when your machine setup requires variable end-stops or frequent product changeovers that demand different retract distances. Instead of stocking multiple fixed-stroke SAI cylinders, the SAIJ32X290-100-S lets you trim the travel back by up to 100 mm on the fly.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 290 mm stroke, PT tapered port threads, and the -S magnet option. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, consider an AirTAC SAIL or BSAI cylinder. Standard mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm. This creates a usable travel window of 190 to 290 mm, letting you set the exact end-position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.