
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This variant includes a magnet for CMSE reed and DMSE electronic sensors, utilizing a standard carbon steel rod with PT tapered ports. The extruded aluminum barrel maintains standard ISO 15552 mounting dimensions while omitting the FB, CA, CB, and CR mounting styles found on some fixed-stroke variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 280-290mm retract position during machine commissioning without machining external stop blocks.
Quickly adjust the stroke by up to 10mm on packaging lines when handling slightly different product sizes.
Use the rear stopper to set a consistent retracted end position for light-duty assembly tooling.
The 10mm rear adjuster acts purely as a mechanical stop to trim the stroke and is not a lock, so load-holding without live air requires a SAIL or BSAI cylinder. Because the 290mm stroke is relatively long for this bore size, external guiding is recommended to prevent excessive side-loading on the 12mm rod.
For a direct ISO 15552 replacement match, verify the 32mm bore, 290mm nominal stroke, 10mm adjustment, PT port thread, and the -S magnet option. The adjustable stopper allows you to dial in the exact position without swapping cylinders or adding external stops.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster allows you to shorten the 290mm nominal stroke by up to 10mm, providing a usable travel window of 280-290mm. The adjuster is a mechanical stop, not a lock, and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.